FAST AND EXTREMELY PRECISE:
PRECISE MEASUREMENT WITH LAT-52
FOR MEASURING APPLICATIONS. 3 DIFFERENT MEASURING RANGES IN IDENTICAL DESIGN
For decades, di-soric has been developing distance sensors that set new standards. And now, di-soric is introducing the laser distance sensors with innovative dual operating concept - either via IO-Link or via manual adjustment using an operating panel. With IO-Link, specific settings can be configured, stored in the IO-Link master and reloaded as needed - even with a swapped device.
3 MEASURING RANGES AVAILABLE
- High resolution: 30 – 80 mm / 0.01 mm resolution*
- Short distance: 50 – 200 mm / 0.01 mm resolution*
- Universal: 50 – 500 mm / 0.1 mm resolution*
READY-TO-RUN /
3 PRECONFIGURED SENSOR MODES
- Standard: for a wide variety of applications
- Power: For dark objects
- Speed: quick measurement
IO-LINK
- Digital, loss-free transmission of measured values
- Diagnostic functions
- Identification
- Localization function
- Average and median filter
- IO-Link relative measurement
PRECISE, FAST AND SAFE
- thanks to perfectly coordinated components that make optimal use of the triangulation method and thanks to use of a laser from the hazard-free Laser Class 1 according to EN 60825-1
VERY EASY OPERATION
- Large, easy-to-operate keys
- Important functions can be operated intuitively
- 3 diagnostic LEDs
- Teach object detection
- Teach windows
- NO/NC changeover
- Adaptation of switching point
MORE FLEXIBLE, FASTER, MORE PRECISE, SIMPLER -
3 DIFFERENT MEASURING RANGES WITH SMALL BLIND RANGES
The three measuring ranges in the variants High-resolution, Short distance and Universal allow for implementation of an extremely wide variety of applications. Due to the small blind ranges, the LAT-52 can be integrated into machines with little installation space Three selectable sensor modes and additional fi lters ensure precise and optimal measurement results.
LAT-52 APPLICATIONS
LAT52-M500
Sheet transport using robots
The LAT52-M500 units control the suction gripper of the robot The speed is adapted to the working distance with simultaneous collision avoidance, and thus the entire gripping process is time-optimized.
LAT52-M80
Position tappet
In an assembly process, the impression depth must be determined with high precision. The high-resolution variant LAT52-M80 with a measuring range starting at 30mm ensures space-saving installation.
THE SWITCHING ALTERNATIVE WITH IO-LINK
PRECISE DETECTION WITH LVHT-52
THE LASER LIGHT BUTTON WITH WINDOW FUNCTION AND A WORKING RANGE OF 50 – 500 MM
The LVHT-52 features a large detection range and a precisely adjustable window mode. This makes it a very e cient solution for applications that are meant to have a high degree of precision in switching but not measuring. Its extremely intuitive adjustment via the plus/minus keys ensures fast commissioning.
ROBUST DESIGN
- Metal plug connector
- Powder-coated die-cast zinc housing with IP67
- Compatible with LVHT-51 and standard fastening options
PUSH-PULL OUTPUT
- pnp or npn function in one device
PRECISE AND SAFE
- Perfectly coordinated components
- Safe thanks to laser class 1
IO-LINK
- Switching point and hysteresis can be set down to the millimeter
- Diagnostic functions
- Identification
- Localization function
VERY EASY OPERATION
- Large, easy-to-operate keys
- Important functions can be operated intuitively
- 3 readily visible diagnostic LEDs
- Teach analog output
- Teach switching output
- NO/NC changeover
- Current/voltage switchable
- Selection of sensor mode
